MR2 Turbo Aquamist Installation: The Parts List

Overview	Water Pump	Water Line	Wiring

• Aquamist 1s kit, which includes:
  • Race pump
  • 6mm water hose
  • 0.5, 0.6 and 0.7mm nozzles
  • Water filter
  • Fuse holder
  • Power harness
  • Bolts for pump
  • Pressure sensor w/ mounting hardware & spade connectors
  • Relay
• Autometer 1/8" x 12' vinyl tube kit (available from Summit Racing)
• 1/8 BSP to 1/8 NPT adaptor (available from Summit Racing)
• 2' of -3AN steel braided fuel line (Earl's or similar, available from Summit Racing)
• Small rubber grommet to protect 1/8" tube
• Eyelet connectors for grounds
• Spade connectors for relay
• 2 6mm tees
• 12' length of 16 gauge wire
• Wire wraps